Sending A Fax At The End Of A Conversation (Mfc-660Cn Only); Out Of Memory Message - Brother MFC-440CN User Manual

Sending a fax at the end of a
conversation (MFC-660CN
only)
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Press (Fax).
c
Load your document.
d
Press Mono Start or Colour Start.
If you are using the scanner glass
press 1 to send a fax.
e
Replace the handset.

Out of Memory message

If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 36.)
5
5
Sending a fax
5
39