Making Copies; How To Copy; Entering Copy Mode; Making A Single Copy - Brother MFC-440CN User Manual

13

Making copies

How to copy

Entering Copy mode

When you want to make a copy, press
(Copy) to illuminate it in green.
The LCD shows:
COPY
Quality
Enlarge/Reduce
Paper Type
Paper Size
Brightness
Copy Start Press
1 No of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 85.)
Enlarge/Reduce (See page 85.)
Paper Type (See page 88.)
Paper Size (See page 88.)
Brightness (See page 87.)
Contrast (See page 87.)
Color Adjust (See page 88.)
Stack/Sort (See page 87.)
Page Layout (See page 86.)
Set New Default (See page 89.)
Factory Reset (See page 89.)
84
13
13
1
01
Normal
100%
Plain Pap
A4
0
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode
Timer on page 21.)

Making a single copy

a
Press (Copy).
b
Load your document.
(See Loading documents on page 8.)
c
Press Mono Start or Colour Start.

Making multiple copies

You can make up to 99 copies.
a
Press (Copy).
b
Load your document.
c
Enter the number of copies you want.
d
Press Mono Start or Colour Start.
Note
To sort the copies, press a or b to
choose Stack/Sort. (See Sorting
copies using the ADF on page 87.)

Stop copying

To stop copying, press Stop/Exit.
13
13
13
13