Fitting The Reel Stand; Commissioning; Switching The Machine On/Off - Pfaff 571 Instruction Manual

8

Fitting the reel stand

.06
Fig. 8 -10
8

Commissioning

.07
● Check the machine, particularly the electrical wiring, for any damage.
● Clean the machine thoroughly and then oil it or fi ll in oil (see Chapter 10 Care and mainte-
nance).
● Have skilled personnel check if the machine can be operated with the available mains
voltage.
8

Switching the machine on/off

.08
● Switch the machine on or off (see Chapter 7.01 On/off switch).
Do not operate the machine if there is any discrepancy.
The machine may only be connected to an earthed socket!
Have home position of the machine drive verifi ed by certifi ed technicians
before fi rst commissioning! Have settings carried out my technicians where
required (see chapter 8.09)
Installation and commissioning
● Fit the reel stand as shown in Fig. 8-10.
● Afterwards insert the stand in the hole in
the table top and secure it with the nuts
provided.
27