Edge Trimmer -725/04 For 574 And 591 - Pfaff 571 Instruction Manual

Controls
7

Edge trimmer -725/04 for 574 and 591

.10
Switch on knife drive:
● Move lever 1 backwards. The knife moves into operating position.
Switch off knife drive:
● Press lever 1. The knife swings backwards.
Switch on edge guide:
● Swing edge guide 2 into position by hand and press lever 3. The edge guide 2 moves into
Switch off edge guide:
● Raise edge guide 2 and let it click into position. The edge guide 2 is out of operation.
● Raise lever 4. The edge guide swings backwards.
Changing the knife:
● Switch off the machine.
● Loosen screw 5 and remove knife 6.
● Insert new knife and push it close to needle plate insert 7.
● Slightly tighten screw 5.
● Adjust the knife according to Chaper 1.05.07 Knife position in the Adjustment Manual
20
3
2
Fig. 7 - 10
Keep your hands away from the moving knife! Danger of injury!
its operating position.
The following work may only be carried out by technical staff or by persons who
have been properly instructed.
and tighten screw 5.
4
1
7
6
5