Auto Recovery - Hunter 44360 Set & $ave Installation And Operation Manual

icons anD features, cont.
5. Auto recovery – allows heating and cooling systems
to gradually recover from an energy-saving setpoint
temperature to a comfort setpoint temperature. Auto recovery
calculates the time needed to adjust the temperature to
the next program setting. When the thermostat is in Auto
Recovery mode, the display will flash alternating messages of
RECO and the time. Auto Recovery can be disabled by sliding
the recovery switch on the back of the circuit board to the
disable position.
(Auto Recovery will not operate if Permanent or Temporary holds are on.)
Press during the Auto Recovery process to
Hold/Return
manually cancel the recovery.
4