Setting Day And Time - Hunter 44360 Set & $ave Installation And Operation Manual

The default for this thermostat setting is in a 12 hour format.
You can change the format to 24 hour format by pressing
and then
Time
the am/pm indicator will be off when the thermostat is in 24
hour mode.

Setting day and time:

1. Press
Day/Time
Press
2. Press
Day/Time
Press
3. Press
Day/Time
Press
4. Press
Day/Time
Press
You may also press hold/return at any time to return to the
normal display.
settings, cont.
.
Program
. (AM/PM and current hour will flash)
or to adjust the setting.
Up Down
again to adjust the minute setting.
or to adjust the setting.
Up Down
again to adjust the day of the week.
or to adjust the setting.
Up Down
to return to the normal display.
or to adjust the setting.
Up Down
2
Day/