Ambient Conditions - Lochinvar CH 100 G CE Installation, Commissioning, User & Maintenance Instructions

3
3.3

Ambient conditions

3.3.1
3.3.2
18
Installation
Caution
The water heater may not be used in rooms where chemical substances are
stored or used due to the risk of explosion, and corrosion of the water heater.
Some propellants, bleaching agents and degreasing agents etc. disperse
vapours that are explosive and/or cause accelerated corrosion. If the water
heater is used in a room in which such substances are present, the warranty will
be void.
CH appliances are open appliances and may only be installed in an open boiler
room. They are type B
11BS
Air humidity and ambient temperature
The boiler room must be frost-free, or be protected against frost. The table
shows the ambient conditions that must be adhered to for correct functioning of
the electronics present in the water heater to be guaranteed.
Air humidity and ambient temperature specifications
Air humidity and ambient temperature
Air humidity
Ambient temperature
Maximum floor load
Allow for the appliance's weight with respect to the maximum floor load; refer to
the table.
Weight of the appliance filled with water
Weight (kg) of the appliance filled with water
CH 100
CH 155
CH 200
CH 300
CH 400
CH 500
CH 600
.
max. 93% RH at +25°C
Functional: 0 < T < 60°C
507
507
510
581
576
525
526
is
Instruction manual CH