Gas Connection; Flue Gas Discharge - Lochinvar CH 100 G CE Installation, Commissioning, User & Maintenance Instructions

is
3.8

Gas connection

3.9

Flue gas discharge

Legend
1 draught diverter
2 flue gas discharge
Instruction manual CH
Warning
The installation should be carried out by a competent person, in compliance
with general and locally applicable regulations
Caution
Make sure that the diameter and length of the gas supply pipe are large
enough to supply sufficient capacity to the water heater.
See (D) in the installation diagram
1. Fit a manual gas valve (10) in the gas supply pipe.
2. Blow the gas pipe clean before use.
3. Close the manual gas valve.
4. Fit the gas supply pipe to the gas control valve.
Warning
After fitting, check for leaks.
Warning
The installation should be carried out by a competent person, in compliance
with general and locally applicable regulations
Fit a vertical chimney pipe (2) of at least 0.5 metres length to the opening of the
draft diverter, before fitting the rest of the chimney materials according to current
regulations (1.3 "Regulations").
Installing the draught diverter
>0,5m _
(1.3 "Regulations").
(3.5 "Installation diagram").
(1.3 "Regulations").
2
1
IMD-0148 R2
27