Work Bowl Assembly; Multipurpose Blade & Dough Blade Assembly; Slicing & Shredding Disc Assembly; Mini Bowl Assembly - KitchenAid 12 CUP KFP750 Instructions Manual

Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
Multipurpose Blade and
Dough Blade Assembly
Place the blade on the power shaft.
Rotate the blade so it falls into place
on the shaft.
Slicing and Shredding Disc
Assembly
1. Place the disc stem on the power
shaft.
2. Fit the disc over the metal pin on
the disc stem, then rotate the disc
until it falls fully onto the stem.

Mini Bowl Assembly

1. Place the mini bowl inside the
work bowl over the power shaft.
Rotate the mini bowl until it falls
into place. When properly seated
in the work bowl, the mini bowl
cannot be rotated.
2. Fit the mini blade on the power
shaft. It may be necessary to
rotate the blade until it falls into
place.
3. To remove the mini bowl after
processing, lift the bowl using the
two finger grips located along the
top edge of the bowl.
9