Preparing The Food Processor For Use; Before First Use; Work Bowl Assembly - KitchenAid KFPW760QER0 Instructions And Recipes Manual

Preparing the Food Processor for Use
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
Before First Use
Insert the desired accessory into
the work bowl. See pages 9-1 2
for accessory instructions.
Place the work bowl cover on the
work bowl with the feed tube just
to the left of the work bowl
handle. Grasp the feed tube and
turn the cover to the right until it
locks into place.
Before using your Food Processor for
the first time, wash the work bowl,
work bowl cover, chef's bowl, mini
bowl, feed tube pusher, discs, and
blades either by hand or in the
dishwasher (see "Cleaning the Food
Processor" on page 16).
Work Bowl Assembly
1. Place the Food Processor base on a
dry, level countertop with the
controls facing forward. Do not
plug in the unit until it is
completely assembled.
2. With the handle just to the left of
center, place the work bowl on the
base, fitting the center opening
over the power shaft.
3. Grasp the work bowl handle and
turn the bowl to the right until it
locks into position.
NOTE: Do not attach the cover to the
work bowl before the work bowl is
locked on the base. Damage to the
work bowl may result.
6. Fit the 2-piece food pusher into
the feed tube.