Night-Time Setting; Setting The Record Interval; Entering The Total Distance - Cateye Stealth 10 CC-GL10 Instruction Manual

From "Clock setting" (page 24)

Night-time setting

Set the time when the backlight lights up.
* When you do not want to turn on the backlight throughout the
day, set the start time and end time to the same hour.
Changing
the settings
MODE
(press & hold)
MODE
MODE
(press & hold)
MODE
(press & hold)
Register
the setting
MENU
To "Setting the record interval"
Start time
Enter the start time when the backlight
lights up.
Increase the value
MODE
End time
Enter the end time when the backlight
lights off.
Increase the value
MODE
From "Night-time setting"

Setting the record interval

Set the second-scale interval to record the measurement data.
* The maximum recording time / maximum time for one trip that
can be recorded in the computer depends on the selected interval.
Changing the
settings
MODE
(press & hold)
MODE
Register
the setting
MENU

Entering the total distance

You can enter the start value of the total distance, and add the trip
distance to it. Use this function when you renew and/or reset your unit.
* Enter the total distance in integer number only.
Changing
the settings
MODE
MODE
(press & hold)
(00000 - 99999)
Register
the setting
MENU
To "Selecting the speed unit" (page 25)
Maximum
Maximum
Record recording time
time for one
interval (total time of
trip
all trip data)
1-S
35 hours 12 hours
(1 second)
2-S
70 hours 24 hours
(2 seconds)
5-S
175 hours 60 hours
(5 seconds)
1-S 2-S 5-S
MODE
Increase the value
MODE
Move digits
(press & hold)
MODE
24