Chapter 1
An Overview of the Cisco Unified IP Phone
Checklist for Installing the Cisco Unified IP Phones 7906G and 7911G
Table 1-5
Checklist for Installing the Cisco Unified IP Phones 7906G and 7911G
Task
Choose the power source for the
1.
phone:
Power over Ethernet (PoE)
–
External power supply
–
Assemble the phone, adjust phone
2.
placement, and connect the network
cable.
3.
Monitor the phone startup process.
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
If you used auto-registration, you need to update the specific configuration
information for the phone such as associating the phone with a user, changing the
button table, or directory number.
Table 1-5
provides an overview and checklist of installation tasks for the
Cisco Unified IP Phone 7906G and 7911G. The list presents tasks in a suggested
order to guide you through the phone installation process. Some tasks are
optional, depending on your system and user needs. For detailed procedures and
information, refer to the sources in the list.
Purpose
Determines how the phone
receives power
Locates and installs the phone
in the network
Verifies that phone is
configured properly
Overview of Configuring and Installing Cisco Unified IP Phones
For More Information
See the
"Providing Power
to the
Cisco Unified IP Phones
7906G and 7911G"
section on page
2-4.
See the
"Installing the
Cisco Unified IP Phone"
section on page
3-9.
See the
"Verifying the
Phone Startup Process"
section on page
3-16.
1-23