What Networking Protocols Are Used - Cisco 7906G Administration Manual

What Networking Protocols Are Used?

6 Hold button
7 Keypad
8
Volume button
9 Handset
10
Footstand
What Networking Protocols Are Used?
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
1-4
Places the active call on hold, resumes a call on hold, and switches
between an active call and a call on hold.
Allows you to dial phone numbers, enter letters, and choose menu
items.
Controls the handset, headset, speaker, and ringer volume.
Functions like a traditional handset. The light strip at the top of
the handset blinks when the phone rings and stays lit if there is a
new voice message (depending on your voice messaging system).
Allows the phone to stand at a convenient angle on a desk or table.
Also may be removed for wall mounting to mounting screws or to
a Cisco Unified IP Phone wall mount kit.
Cisco Unified IP Phones support several industry-standard and Cisco networking
protocols required for voice communication.
the supported networking protocols on the Cisco Unified IP Phones 7906G and
7911G.
Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-1 provides an overview of
OL-10008-01