Cisco 7906G Administration Manual page 162

Chapter 7 Viewing Security Information, Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Table 7-5
Item
One of the following
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Elapsed Time
Port 1
Port 2 (applies to 7911G
only)
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
7-18
Network Statistics Screen (continued)
Description
Cause of the last reset of the phone
Amount of time that has elapsed since the phone
connected to Cisco Unified CallManager
Link state and connection of the Network port
Link state and connection of the PC port (for
example,
PC port is in a link up state and has auto-negotiated
a full-duplex, 100-Mbps connection)
Auto 100 Mb Full-Duplex
means that the
OL-10008-01