Starting And Stopping; To Start Engine; To Stop Engine - Briggs & Stratton 110000 Operating And Maintenance Instructions Manual

WARNING
• Do not use pressurized starting fluids.
• Vapors are flammable.
REWIND (MANUAL) STARTER

TO START ENGINE

OIL
LEVEL
FULL
[1] Check oil level (see p. 7).
[5] Push rocker switch
(if equipped) to ON.

TO STOP ENGINE

CAUTION: Do not stop
engine by moving choke
control to CHOKE.
Backfire, fire or engine
damage could occur.
OPEN
POSITION
Fuel shut-off
[2] Turn fuel shut-off valve (if equipped) 1/4 turn
to OPEN.
[3] Push choke lever to CHOKE position.
WARNING
[6] Grasp rope handle. Pull slowly until
resistance is felt, then pull rapidly to start
engine and avoid kickback.
[1] Move throttle (if equipped)
to SLOW, then to STOP.
9

STARTING AND STOPPING

CAUTION: Some engines may be equipped with OIL
GARD®. The OIL GARD® is intended to warn the
operator that the engine is low on oil. Always check oil
level before starting. Engine damage may occur if the oil
level is not properly maintained and will void warranty
coverage. If the engine will not start, has stopped running
and/or a light flickers in the stop switch, add oil (see
instructions).
Choke
[4] Move
[7] Let engine warm up.
[2] Push rocker switch
(if equipped) to
OFF.
throttle (if
equipped) to FAST.
Operate engine with
throttle in FAST.
If choke equipped:
Slowly adjust toward RUN
position. Wait until engine
runs smoothly before
each choke adjustment.
Fuel shut-off
[3] Close fuel shut-off
valve (if equipped).