Sonar Tab; Setting Up Dsc - Garmin GPSMAP 376C Owner's Manual

Setting Up DSC

Use the Setup sub tab to turn DSC on and off. If you have more than
one chartplotter and only want DSC to show on another chartplotter,
turn DSC off on this unit.
This Setup sub tab also allows you to simulate Distress Calls and
Position Reports while the unit is in Simulator Mode, see
Simulating calls is helpful for practice before connecting to the real
system. The Distress Call simulator also helps to check if alarms are
working properly.
GPSMAP 376C Owner's Manual
190-00508-00_0C.indd 75
page
DSC Setup

Sonar Tab

Use the Sonar tab to set up and configure sonar. See the
Up and Using Sonar" section beginning on
information about Sonar setup options.
NOTE: You must have a GSD 20 or 21 Sounder Module
12.
connected to your GPSMAP 376C to use sonar.
Main Menu—Sonar Tab
M M > S T
AIN ENU ONAR AB
"Setting
page 103 for more
75
11/6/2006 9:47:37 AM