Installing The Bridge Media - Toshiba Satellite A500 Service Manual

4.2 Battery Pack/PC card/Bridge Media 4 Replacement Procedures

Installing the Bridge Media

Install the Bridge Media according to the following procedures and Figure 4-3, after
checking that the computer is turned off in boot mode.
1. Insert a Bridge media and press it until it is securely connected.
After the Bridge media is installed, check the hardware configuration in the Hardware Setup
or TSETUP program to make sure that the Bridge media is compatible with the current
hardware configuration.
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-13