HP 650 Installation Manual page 30

N o t e
1-26
Installation
Set the correct time and date.
NCL Prompt
Figure 1-17. NCL Screen with Default Prompt
3. At the prompt, enter the Time command with the date and time:
time mm/dd/yy hh:mm:ss [Return]
where:
mm = month
dd = day
yy = year
4. Use the Exit command to exit from NCL and return to the Main
menu:
exit [Return]
For details on the Time command and other NCL commands, refer to
chapter 16 of the Operator's Reference.
hh = hour
mm = minutes
ss = seconds