HP 650 Installation Manual page 14

1-10
Installation
Install interface card(s).
Figure 1-5. Unlocking Card Bezel
Figure 1-6. Disengaging Card Bezel
3. Grasping the left and right ends of the bezel, pull out until the tray is
about half exposed.
4. Grasping the sides of the tray, remove the card blank from the router.
Keep the card blank so that it can be reinstalled if the interface card
needs to be removed.
5. Holding the card by the sides of its tray, slide the back of the card
about half-way into the router.