Setting Up The Dj-X2000; Attaching The Antenna; Attaching The Belt Clip; Attaching The Wrist Strap - Alinco DJ-X2000 Instruction Manual

Wide range scanning receiver

Hide thumbs Also See for DJ-X2000:

Table of Contents

1.4 Setting up the DJ-X2000

Before using your receiver, attach the included antenna securely. If you want to

use the belt clip or wrist strap, attach them too.

Fit the base of the antenna over the

projections on the connector, press

downward and turn clockwise. Check to

be sure the antenna is securely attached.

Screw the belt clip onto the rear panel

(screws x 2). Check to be sure the clip is

securely attached before use.

Fit the wrist strap under the belt clip and

pull it through its own loop.

Table of Contents

Show Quick Links

Table of Contents