Setting The Frequency; In Vfo Mode; In Preset Mode - Alinco DJ-X2T Instruction Manual

Setting the Frequency

In VFO mode

· Pressing the [
2
step.
· To increase/decrease the frequency by 1MHz-step, hold down the [1MHz
(ANT)] key, and press the [
· To increase/decrease the frequency by 10MHz-step, hold down the [10MHz
(BANK)] key, and press the [
Increases/decreases
the frequency.

In Preset mode

1
Select a band by pressing the [10MHz (BANK)] key.
Every press of the [10MHz (BANK)] key changes the band as shown below:
AM radio
2
1
2
Increase/ decrease the frequency by pressing the [
Tip
· When selecting AM radio, "AM" appears on the upper part of the display.
· When selecting FM radio or TV, "WFM" appears on the upper part of the dis-
play, and the FM radio frequency or TV channel is displayed below.
18
/ ] keys increases or decreases the frequency by a tuning
/ ] keys.
/ ] keys.
RX FREQUENCY
0.5 ~ 1000MHz
700 MEMORY
CHANNELS
WIDE BAND COMMUNICATION RECEIVER DJ-X2
V / P / M
M W
MONI 10MHz
SCRT
Lithium-ion
FM radio TV AM radio ···.
RX FREQUENCY
X2
0.5 ~ 1000MHz
700 MEMORY
CHANNELS
WIDE BAND COMMUNICATION RECEIVER DJ-X2
V / P / M 1MHz SCAN VOL/SQL
M W ANT MODE SET
MONI 10MHz P S FUNC
SCRT BANK STEP/SKIP ENTER
Lithium-ion BATTERY INSIDE
X2
1MHz SCAN VOL/SQL
Increases/decreases
ANT MODE SET by 1 MHz-step.
P S FUNC
Increases/decreases
BANK STEP/SKIP ENTER
by 10 MHz-step.
BATTERY INSIDE
/ ] keys.