1.4 Setting up the DJ-X2000
Before using your receiver, attach the included antenna securely. If wanting to
use the belt clip or wrist strap, attach them too.
1.4.1 Attaching the antenna
1.4.2 Attaching the belt clip
1.4.3 Attaching the wrist strap
Fit the base of the antenna over the
projections on the connector, press
downward and turn clockwise. Check the
antenna is securely attached.
Screw the belt clip onto the rear panel
(screws x 2). Check the clip is securely
attached before use.
Fit the wrist strap under the belt clip and
pull it through its own loop.
13