Paxar 676 User Manual page 27

P R I N T
V A L U E : ± X X
C H A N G E
V A L U E : ± X X
S T A T I O N
V A L U E : ± X X
P R E S S
P R I N T H E A D
Users Manual Model 676
P O S I T I O N
N E W
This screen follows the second screen under PRINTER ADJUSTMENTS. This
screen allows the print position of station 3 to be adjusted.
The <YES / NO> buttons are used to change the print value.
The value is displayed in a positive/negative format. The value ranges for XX and
YY can be from a -9 to a +9
Pressing the MODE/Down Arrow key will take the user to the next screen.
Pressing the EXIT/Up Arrow key will take the user back to the HOME.
C U T P O S I T I O N
N E W
This screen follows the print adjust screens. This screen allows the cut position to
be adjusted. The <YES / NO> buttons are used to change the cut value. The value
is displayed in a positive/negative format. The value ranges for XX and YY can be
from a -9 to a +9. Pressing ENTER will change the CURRENT CUT value to the
NEW CUT value. Pressing the MODE/Down Arrow key will take the user to the
next screen. Pressing the EXIT/Up Arrow key will take the user back to the
"HOME" screen.
2 D O T
N E W
This screen follows the CHANGE CUT POSITION screen. This screen allows the
print position of station 2 to be adjusted in the WEB direction.
The <YES / NO> buttons are used to change the shift value.
The value is displayed in a positive/negative format. The value ranges for XX and
YY can be from a -16 to a +16 dots. (A dot is 1/300)
Pressing the MODE/Down Arrow key will take the user to the first screen under
PRINTER ADJUSTMENTS.
Pressing the EXIT/Up Arrow key will take the user back to the HOME.
PRINTHEAD SETUP
E N T E R F O R
S E T U P
This screen follows the PRINT/CUT POSITIONS screen.
Pressing ENTER will take the user to the PRINTHEAD SETUP screens.
Pressing the MODE/Down Arrow key will take the user to the "LIFE
COUNTS/VERSIONS" screen.
Pressing the EXIT/Up Arrow key will take the user back to the "HOME" screen.
S T A T I O N
V A L U E : ± Y Y
V A L U E : ± Y Y
S H I F T
V A L U E : ± Y Y
Control Panel Operation • 27
3