Supermicro C7Z97-M Series Motherboard User's Manual
Memory Overclocking
Load Memory Profiles
Use this feature to set Performance Memory Profiles which may cause
impact on memory behavior*. Select Automatic to allow the BIOS to
automatically set Performance Memory Profiles. Select Manual to manu-
ally configure Performance Profiles. The options are Automatic, Manual,
XMP Profile 1 and XMP Profile 2.
If Automatic is selected, the installed memory will run at 2200MHz if the
detected memory is rated at 2400MHz or above, and run at 1867MHz if
the memory detected is rated at 1867MHz.
If Manual, XMP Profile 1 or XMP Profile 2 is selected, the following op-
tions will be available. These options will only appear if XMP (Extreme
Memory Profile) Memory is/are installed:
Memory Clock
This option selects the Memory Clock Multiplier. The options are
133MHz and 100MHz.
*The C7Z97-M/MF supports memory modules having a frequency of more than 2133MHz
(Extreme Memory Profile or XMP Memory). However, XMP memory is not within the JEDEC
memory standard. Compatibility and stability of these memory modules depend on varying
factors, including the processor's capabilities and other devices installed.
4-24