Audio Enable (Jpac1); Watch Dog Enable/Disable (Jwd1) - Supermicro Supero C7Z97-M User Manual

Supermicro C7Z97-M Series Motherboard User's Manual

Audio Enable (JPAC1)

JPAC1 allows you to enable or disable the
onboard audio support. The default posi-
tion is on pins 1 and 2 to enable onboard
audio connections. See the table on the
right for jumper settings.

Watch Dog Enable/Disable (JWD1)

Watch Dog (JWD1) is a system monitor that
can reboot the system when a software appli-
cation hangs. Close Pins 1-2 to reset the sys-
tem if an application hangs. Close Pins 2-3 to
generate a non-maskable interrupt signal for
the application that hangs. See the table on
the right for jumper settings. Watch Dog must
also be enabled in the BIOS.
JL2
JI2C1
JI2C2
JBT1
S8
B
S11
JF1
JSD1
A
HD AUDIO
FAN5
BIOS
LICENSE
JD1
I-SATA0 I-SATA1 I-SATA3
FAN3
HDMI/DP
LAN
USB 12/13
(3.0)
USB 2/3
(3.0)
JPL1
C7Z97-M
Rev. 1.00
USB8/9(3.0)
JPW1
I-SATA1 I-SATA3 I-SATA5
I-SATA0 I-SATA2 I-SATA4
2-30
Audio Enable/Disable
Jumper Settings
Both Jumpers Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
Watch Dog
Jumper Settings
Jumper Setting Definition
Pins 1-2 Reset (default)
Pins 2-3 NMI
Open Disabled
A. Audio Enable
B. Watch Dog Enable
USB 0/1
VGA(IPMI)
KB/MOUSE
JPW2
S4
DIMMA1
DIMMA2
DIMMB1
DIMMB2
FAN2