NEC Xen Topaz User Manual page 6

Placing Calls
Using Abbreviated Dialling
CALL DC
Common
/Personal
Abbv.
CALL
Group
8 1
Abbv.
Group Abbv. Key
(SC.851+28)
Common/Personal Abbreviated Dialling Bins are numbered as follows:
2-digit dialling: Common = 00-79, Personal = 80-99, or
3-digit dialling: Common = 000-899, Personal = 900-919 (default).
Using Directory Dialling <Display Phones>
Personal ABB List
DC
Common ABB List
Group ABB List
Extension List
Press repeatedly
to choose list
To search for a name in the list, dial the digits which correspond to the
first letter(s) of the name. Refer to "Entering a Name" on Page 3.
Scrolling through a list is performed in alphabetical order.
The operation will be cancelled if no key is pressed within 5 seconds.
The directory lists available depends on your system configuration.
Last Number Redial <Outside/Intercom Calls>
CALL LND
(On-Hook) LND
Redial List
Intercom numbers may also be stored under Last Number Redial. Ask your NEC Authorised Supplier.
The system retains the last 10 numbers dialled which can be viewed and redialled from the Redial List.
Common/Personal
Abbv. Bin No.
? ? ?
Group Abbv. Bin No.
4 ? ? ?
Dial Digits
VOL
? ?
Enter characters to Scroll to
search for name desired number
VOL
Find desired number
6
If your call doesn't go through...
Setting Camp On / Callback / Trunk Queuing
0
(Hear Busy Tone,
Camp On Key
No Answer, or
Trunk Unavailable)
(SC.851+35)
[Lit Red when set]
<Camp On> For Intercom Call, when you hear ringing, wait for the called party to answer.
For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number.
<Callback> For Intercom Call, when your phone starts the ringing, lift handset and wait for the called
party to answer.
For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and
begin dialling the telephone number.
Cancelling Camp On / Callback / Trunk Queuing
8
When Camp On set
Or press the
Camp On Key
Set / Answer a Message Waiting
Set
8
Hear Intercom
Busy Tone or
No Answer
(SC.851+38)
Your phone's
Answer
8
Indicator is
flashing in Red
(SC.851+38)
When you set a MW, the called party's MW Indicator starts to flash, and your MW Indicator is lit Red.
When you answer a MW, the MW Indicator will automatically go off when the called party answers.
<Camp On> Wait without
hanging up
Wait for the
<Callback>
system to call
you back
7 0
Camp On Key
(SC.851+35)
4 1
MW Key
4 1
MW Key
7