Table of Contents
Advertisement
13 Configuring the network settings [Network]
13.2 Configure the HTTPS settings
Click the [Network] tab on the "Network" page. (®page 21, page 23)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to units on this page.
The HTTPS settings will be configured in the following procedure.
When using the self-signed certifi cate
Generation of the self-signed certi ficate
Generation of the CRT key (SSL encryption key) (®page 75)
Generation of the self-signed certificate (®page 76)
Generation of CSR (Certificate Signing Request) (®page 78)
Installation of the server certificate (®page 79)
Configuration of the connection protocol (®page 80)
74
Operating Instructions
Generation of the CRT key (SSL encryption key)
Con figuration of the connection protocol
Access to the units using the HTTPS protocol
When using the server certi ficate
Generation of CSR (Certi ficate Signing Request)
Application for the approval by CA
(Certi ficate Authority) - Issue of the server certifi cate
Installation of the server certi ficate
A
B
C
D
E
Advertisement
Table of Contents
