Clear Note - GEM WK1 Owner's Manual

Quantize
Quantize function self-corrects errors in the recording Tempo. In other
words, small possible imperfections are trimmed and corrected, and the
beats are made homogeneous within a bar, according to the established
Quantize value.
1 1 1 1 1
. Select and playback the Riff you wish to correct, then press the
Q Q Q Q Q U U U U U ANTIZE ke ANTIZE key y y y y ANTIZE ke ANTIZE ke ANTIZE ke
The playback stops and the Riff, track and current quantize value are
shown in the display.
2 2 2 2 2
. Use the CURSOR key to move to the Quantize parameter, and the
TEMPO/DATA keys to select a new value.
3 3 3 3 3
. Press the Start/Stop key to listen to the corrected Riff.
4 4 4 4 4
. If you are satisfied with the corrections, press the ENTER key twice
to confirm.
If you wish to further improve the pattern, stop the execution by
pressing the Start/Stop key. Select a new quantize value and listen to
the newly modified riff agin. You can continue until the patterns sounds
perfect.

Clear Note

If you detect that a Riff contains wrong notes, you can clear them. Up
to 5 notes can be cleared at the same time from the recorded Riff.
1 1 1 1 1
. Select the Riff you wish to correct, then press the CLEAR key.
2 2 2 2 2
. Select the track you wish to modify by pressing the relative Function
key.
In our example, the Drum track will be corrected by cancelling a few
notes.
3 3 3 3 3
. While the Riff is playng, check the beat counter and identify at what
point and which notes you wish to clear.
4 4 4 4 4
. Press the keyboard note you wish to cancel just a little below the
established point.
5 5 5 5 5
. Stop the pattern by pressing the Start/Stop key.
6 6 6 6 6
. To exit CLEAR mode, press the ESCAPE key twice.
Apply this procedure to any Riff you wish to improve.
1
2
4
1
2
5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User Styles 63
3
4
6
○ ○ ○ ○ ○ ○ ○ ○ ○