Sounds Can Be Selected As Follows; Keyboard Sounds - GEM WK1 Owner's Manual

Selecting a Sound

SOUNDS CAN BE SELECTED AS FOLLOWS:

a) By recalling the desired Sound to the Real Time keyboard section: first
press the SOUND key (led ON) and digit the corresponding Sound
number on the numeric keypad;
b) by recalling a Performance that contains the sound combinations as
well as other performance parameters;
c) by recalling a SINGLE TOUCH PLAY setting using one of the 9 Function
keys (F1...F9).

KEYBOARD SOUNDS

To assign a Sound to a keyboard section (Upper 1, Upper 2 e Lower), you
must first select the section: use the UPPER 1, UPPER 2, LOWER keys,
or the relative function keys.
Only one section at a time can be enabled.
1. Press one of the section selectors to the right of the display.
The arrowhead moves immediately to the selected section, while the
Sound it contains blinks in the display.
2. Enter the Sound number on the numeric keypad.
To select a Sound whose number is greater than 99, first press the
100+ key, then enter the two remaining digits. (For example, taking the
Sound table on the top right of the control panel as a reference, select
Sound No. 100 BRIGHTNESS: first press the +100 key, then enter 0
twice in the SOUND keypad).
3. Play on the keyboard and listen to the sound recalled.
Repeat the operation to change the sound of another section.
The Sound shown in the display is always the one assigned to the
section indicated by the right arrowhead.
BANKS 1, 2, 3 AND 4
WK1 are arranged in SOUND BANKS. They can be selected pressing the WK1 WK1
WK1 WK1
+ e - on the numeric keypad, at one time.
Banks 1,2 each 3 contain 128 sounds (Sounds from Bank 1 are General
MIDI compatible); Bank 4 features 60 more Sounds that can be played
back by selection Bank 4 and using either the + or - key from the right
numeric keypad to scroll over its contents. Banks 1, 2 and 3 are GMX
compatible (GMX is an extended General Midi standard created by
Generalmusic).
WK1 WK1 WK1 Drumkits are contained in Banks 2, 3 and 4 (112-119). You can WK1 WK1
choose among the 17 Drumkits are available. The relative drum maps are
provided in the Appendix to the Owner's Manual. Bank 4 offers an extra
Drumkit (DrumSFX). To assign a Drumkit to one of the keyboard sections,
proceed as explained to select a Sound. Make sure that BANK 2 or BANK
3 are selected, then enter the Drumkit number (112-119). The current
Bank number is shown by the numbered indicators, in the bottom right
hand corner in the display.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
24 Owner's Manual
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
a
b
c
1
2