Recalling A Style From A Performance - GEM WK1 Owner's Manual

3. If you wish to change the Sound assigned to one or more tracks,
first check that the PERF menu funcion IS NOT selected and that
the S.T. PLAY function is OFF, then press the corresponding
function key (F1...F9) to enable the track, that will start blinking in
the display.
You can now change the Sound by digiting the corresponding number
on the right hand selection keypad.
If you wish to modify the track volume level, use the TEMPO/DATA
keys. . . . .
4. Press START / STOP to start the Style.
This operation may be also performed while a Style is playing. In this
case the new Style selected will start on the successive beat.

Recalling a Style from a Performance

Each Performance contains a Style that can be recalled at any time. Press
and hold down the STORE PERFORMANCE key for a few seconds. When
the ("?") message appears in the display confirm with ENTER. The current
panel configuration, including the active Variation and Tempo will be stored
to the Performance.
Therefore it is possible to recall a Style (and the relative Variation/Tempo)
by selecting a Performance, provided that the STYLE LOCK function is
not active.
1. Disable STYLE LOCK if this is ON (the display indicator to must be
OFF).
2. Press the PERFORMANCE RECALL key if you are not yet in Per-
formance mode.
The name of the first Performance in the first group and the name of the
current group (es. P11: GranPNO) will appear in the display.
Each function key selects one of the 9 Performances of the selected
group.
3. If you wish to change group (7 groups are available) use the PAGE
PAGE key , or the + e – keys in the numeric keypad. Use the
TEMPO/DATA keys to control Tempo.
Recalling a Performance automatically disables the SINGLE TOUCH
PLAY function and restores WK1
mance. If the TEMPO LOCK function is disabled, the Tempo is also
updated.
4. 4. 4. 4. 4. Press ST Press ST Press ST Press STAR AR AR ART / ST T / ST T / ST T / STOP to run the Style OP to run the Style OP to run the Style OP to run the Style. . . . .
Press ST AR T / ST OP to run the Style
T T T T T O O O O O T T T T T AL CLEAR OF AL CLEAR OF AL CLEAR OF THE USER STYLE AL CLEAR OF THE USER STYLE THE USER STYLE THE USER STYLE
AL CLEAR OF THE USER STYLE
In User Style mode, only total cancellation of the Style location (96 - 103)
is permitted.
Make sure that one or more Styles are loaded to the machine internal
memory. Select the USER STYLE mode using the numeric keypad with
the STYLE led ON, then proceed to CLEAR.
1. Press and hold the RECORD key in the Sequencer for a few
seconds.
2. Press the CLEAR button.
3. Use the TEMPO/DATA keys to select ALL function.
4. Press ENTER twice
WK1 to the default status of the Perfor- WK1 WK1
WK1
GranPNO
e
1
2
3
4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Styles 31