6RIWZDUH XSGDWH
Analog - Digital SW update via USB
1.
Please copy the files to USB (root).
mb60_en.bin
mboot.bin
usb_auto_update.txt
2.
Turn power to OFF by mechanical switch(rocker switch) or removing AC
plug. And plug the USB to TV
3.
Keep pressing OK key from remote controller and then turn the TV power
to ON(by mechanical switch or by inserting the AC plug) and keep OK key
pressed until the stanby led blinks rapidly(rapid blinking is faster than
normal blinking)
4.
When the led is started to blink rapidly, you can release the OK key.Please
wait approximately for 1-2 minutes.
5.
When the blinks of led is stopped, TV opens autamatically with the new
SW.
SOFTWARE UPDATE
69
LC-40SH340E
LC-40SH340K