Saving Your System Configuration To A Usb Flash Drive; Network; Configuring Dhcp Or Fixed Ip Address - Lorex LNR100 SERIES Instruction Manual

14 Using the Main Menu

14.2.6 Saving Your System Configuration to a USB Flash Drive

The system allows you to save your current system configuration to a USB flash drive (not
included). This is useful if you want to backup your current settings.
Note
This function only saves settings created in system menus. It does not save or backup any video.
To export the system configuration to a USB flash drive:
1. Insert a USB flash drive into one of the USB ports on the system.
2. Right-click and select Main Menu
3. Click >Config Backup.
4. Check the USB flash drive you would like to export to in the list.
5. Click Export.
To import a saved system configuration:
1. Insert a USB flash drive with a saved system configuration into one of the USB ports
on the system.
2. Right-click and select Main Menu
3. Click >Config Backup.
4. Check the USB flash drive with the saved system configuration file.
5. Click Import.
6. Click OK. The system will restart.

14.3 Network

The Network menu allows you to configure your system's network settings.
Note
The WIFI menu is not supported.

14.3.1 Configuring DHCP or Fixed IP Address

The Network menu allows you to configure IP address settings.
To configure IP address settings:
1. From live view, right-click and select Main Menu.
2. Click >Network.
#; r. 1.0/14396/14396; en-US
56