Saving Your System Configuration To A Usb Thumb Drive - Lorex LNR110 Series Instruction Manual

13 Using the Main Menu
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the
live display. This setting does not affect recordings.
• Original Scale: Select channels to display the original aspect ratio of the camera.
3. Click OK to save changes.

13.3.21 Saving Your System Configuration to a USB Thumb Drive

The system allows you to save your current system configuration to a USB thumb drive
(not included). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB thumb drive:
1. Insert a USB thumb drive (not included) into one of the USB ports.
2. From the Main Menu, click
#LX400070; r. 1.0/27147/27147; en-US
and then click Setting>Display>Display.
and then click Setting>Config Backup.
70