Xerox DocuPrint N3225 User Manual page 143

Table 5.2 Printer operation problems
Problem
A PostScript or PCL job
fails to print.
For a PostScript job, do the following.
• Check that you are using a PostScript or PCL printer driver.
• For a PostScript job, set the Print PS Errors item in the System Menu to
and re-send the job.
• If an error page prints, there is a problem in the PostScript coding. Correct
the coding problem and re-send the job. Asking for features not available can
cause a configuration error.
• If the job still does not print and an error page was not printed, the job may
require additional memory.
For a PCL job, do the following:
• Check the output for PCL errors.
• If there is a problem in the PCL coding, correct the coding problem and
re-send the job.
• If there is no error message, re-send the job.
• If the error message says "out of memory", the job may require additional
memory. Contact your dealer for ordering more printer memory.
Solving Printing Problems
Action
Table 5.2 Page 4 of 4
Chapter 5: Troubleshooting
On
5-29