Paper Jams
Table 5.1
Paper Jam Messages (continued)
Message
Paper Jam
Clear Env Feeder
Paper Jam
Clear Tray 5
Remove Output
Finisher Bin 1
Remove Output
Finisher Bin 2
Remove Output
Finisher Bin 3
Remove Output
From Finisher
Slide In
Finisher
Stapl Fail
Stapl Fail H5-91
Power Off/On
5-12
User Guide
Description/Corrective Action
The printer cannot feed from the Envelope Feeder. Open the Envelope
Feeder and remove any jammed envelopes.
A paper jam has occurred in Tray 5. Open Tray 5 and remove jammed paper.
See"Clearing Paper Jams" (page 5-6) and "Clearing Tray 5" (page 5-22).
Finisher Bin 1 is full. Remove the output from Bin 1.
Finisher Bin 2 is full. Remove the output from Bin 2
Finisher Bin 3 is full. Remove the output from Bin 3
All three finisher bins are full. Remove the output from all three bins.
The finisher guide rail is not entirely in position. Slide the guide rail into
position. Make sure it is securely snapped into the console. Check to see that
the thumb screw that connects it to the finisher is hand tightened.
Stapler Failure. Power OFF and ON the printer.
The Staple Head did not return to its initial position. Power OFF and ON the
printer.
Table 5.1 Page 6 of 7