Maytag LAT2300 Service Manual page 129

If it is necessary to extend. the drain hose
from the siphon break to the drain facility,
attach the extension hose section to the
siphon break. Use 216015 coupler to
connect extension and drain hoses. Do
not extend the IIgooseneckll end.
If the drain hose is to be shortened, cut
hose behind the gooseneck. Remove as
much as necessary. Use 216015 acces-
sory coupler to splice gooseneck to hose.
Do not cut IIgooseneck" end off.
When used properly, hose clamps are not
required. With the excess section of the
hose removed, join the two ends using
the coupler. Be sure each section of hose
is securely pushed over the end of the
coupler and the hoses joined at approxi-
mately the middle of the coupler.
Drain Hose
16001145-01
©
1997 Maytag Corporation
SECTION 3. SERVICE PROCEDURES
3·61