Watching The Images Being Recorded; (Time Slip); Recording From External Devices; Watching The Images Being Recorded (Time Slip) - Toshiba D-VR3SB Owner's Manual

Watching the Images
Being Recorded (Time Slip)
This function allows you to watch the recently recorded
images on the PIP screen while a recording is in
progress, with a 10 second delay.
Press the
1
• Wait 10 seconds and press the TIME SLIP
button.
• The recently recorded images are played back
on the PIP screen, with a 10 second delay.
• On the TIME SLIP screen, you can playback,
scan, or perform other operations for the
recorded program using the playback related
buttons.
Press the ➛ ➛button to scan the recording in
the reverse order, from the end to the start.
Press the ❿ ❿button to scan to the recently
recorded 10- second images.
Press the
2
TIME SLIP function.
• To stop a recording while a TIME SLIP function
is in progress, press the
twice.
The Time Slip feature only works with DVD-
RAM discs.
Note
The Time Slip function is not supported in the
DV recording mode.
Time Slip function - Pause TV operation
To enable Pause TV while watching a live
programme on the DVD Recorder proceed as
follows:
1) Ensure DVD-RAM disc is inserted.
2) Press Record (REC) button.
3) Allow recording to continue for 10 seconds.
4) Press 'TIME SLIP' button. A PIP (Picture in Picture)
appears to show recording is taking place.
5) Press Play/Pause button. PIP pauses.
6) When desired, press Play/Pause button once
more to commence playback and view the
recorded programme in PIP from the original
Pause position.
7) To transfer this PIP playback with sound to
main TV screen, press PIP button.
Downloaded From Disc-Player.com Toshiba Manuals
78 - English
(REC) button on the remote control.
(STOP) button once to clear the
(STOP) button
Recording From
External Devices
DVD-RAM
Check the remaining time of disc and tape for the
recording. Adjust the recording speed.
1
Connect the Output jack of your External
Devices to the SCART input connector or
AUX on the front of using Audio/Video
Cable.
2
Power on your DVD Recorder-VCR and
switch to input source mode by pressing
the INPUT SEL on the remote .
The front panel display changes on the
following sequence
PR
3
When your DVD Recorder-VCR is in the
stop state, set the operation mode of
your External Devices to play mode.
4
Press the
Recorder-VCR when the image from which
you want to start recording is displayed.
5
Press the
Recorder-VCR when the recording is
finished.
Also refer to the user manual for your
External Devices when recording through
Note
input mode using Audio/Video cable or Scart
jack.
AV1 AV2 AUX DV
(REC) button on your DVD
(STOP) button on your DVD