English; Preparing The Remote Control; Seting The Remote Control - Toshiba D-VR3SB Owner's Manual

Step 7 : Preparing the
Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote.
• Insert two AA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If remote does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental reg-
ulations. Do not put them in the household trash.
• Do not expose the remote sensor of the recorder to a
strong light source such as direct sunlight or other illu-
mination. If you do so, you may not be able to operate
the recorder via the remote control.

24 - English

Downloaded From Disc-Player.com Toshiba Manuals
Setting the Remote Control
Your DVD Recorder-VCR remote control will work with
Toshiba televisions and compatible brands.
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Hold down the TV button and enter the four-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
CLEAR
REC SPEED