Editing Timer Programming Feature; Editing The Settings For A Timer Recording; Editing Timer Programme Feature - Toshiba D-VR3SB Owner's Manual

DVD
AUTO : Select when you want to set video quality auto-
matically. It depends on the remaining time on
the DVD.
XP (high quality) : Select when video quality is are impor-
SP (standard quality) : Select to record in standard quali-
LP (low quality) : Select when a long recording time is
EP (extended mode) : Select when a longer recording
VCR
AUTO : Select when you want to set video quality auto-
matically. It depends on remaining time of VCR
tape.
SP : Standard Play, for best picture quality.
LP : Long Play, for maximum recording time (3 times
SP).
Press the OK button.
5
If you make a mistake
Press the
want to change.
If the timer settings overlap
The programs are recorded in order of priority. If
timer recording is set for the first program and
then again for the second program and both
programs overlap, the first program has priority.
After recording of the first program is complete,
the second program starts being recorded.
To exit without saving the current setting
Press the MENU or VIDEO Plus+ button.
To return to the previous menu
Press the RETURN button if you don't want to
set a timer recording.
Turn the power off to finish the
6
timer recording.
Timer Recording will not work
when the power is on.
• When power is switched on, program regis-
tered for recording in Timer Recording will be
automatically cleared after the start time and
date have passed.
•
a timer recording is registered.
• will blink if disc or tape is not inserted.
Downloaded From Disc-Player.com Toshiba Manuals
tant. (Approx. 1 hour)
ty. (Approx. 2 hours)
required.(Approx. 4 hours)
time is required. (Approx.6 hours
about 1.2 Mbps)
➛❿
buttons to select the item you
will appear on the front panel. It means that
The Timer Programming time may differ from
the set time depending on disc status and
Note
overall timer recording status (for example,
recording times overlapping, or when the pre-
vious recording ends within 2 minutes before
the start time of the next recording.)
Editing Timer
Programming Feature
Follow these directions to edit the timer record list.
Editing the settings for a timer
recording
Press the MENU button.
1
2
❷
Press the buttons to select "Programme"
❿
and then press the
DVD-RAM(VR)
VIdeoPlus+
Standard Timer
Playlist
VIdeoPlus+ Extended
Disc Manager
Programme
DVD-RAM DVD-RW DVD-R
or OK button.
Programme
:Off
English - 75