Fujitsu Primergy BX2560 M1 Operating Manual page 57

I
For the PRIMERGY BX400 system unit, log onto the blade
server and then switch to the Web user interface (Advanced)
via the "Experience" drop-down list in the top right.
c) iRMC
1. Start your Web browser on the remote control terminal and log on to
Management Blade Web user interface.
2. Setting the iRMC network
Ê From the navigation frame of the Management Blade Web user
interface, select each section: Components - Server Blades - Server
Blade-x.
Ê Then set the network of the iRMC in the "iRMC Address
Configuration" box.
For how to set the network, please refer to the "iRMC S4 - integrated
Remote Management Controller" User's Guide (chapter 3,
"Configuring the iRMC S4" under Industry Standard Servers - Software -
ServerView Suite - Out-Of-Band Management on the Fujitsu manuals
server.
Ê If you want to use AVR from the remote control terminal
connected to the management LAN port of the management
blade, the LAN port of the iRMC must be set to "Management
LAN".
Ê In addition, the iRMC and management LAN port of the
management blade must also be set to the same network
address.
3. Start the video redirection
Ê The Video Redirection button will appear on the status frame when you
select each section: Components - Server Blades - Server Blade-x.
Click this button to open the console screen of the server blade.
For details of the Management Blade Web user interface, please refer to
the "ServerView Management Blade S1 User Interface Description" for
the PRIMERGY BX400 Blade Server and the PRIMERGY BX900 Blade
Server.
I
For more on AVR and Virtual Media, please refer to the "iRMC S4
- integrated Remote Management Controller" User's Guide
("Advanced Video Redirection (AVR)" in chapter 5 and "Virtual
BX2560 M1
Operating Manual
Starting up and operation
57