Fujitsu Primergy BX2560 M1 Operating Manual page 51

Indicators on the control panel
Power-on indicator (three colors)
– Lights up green when the server is switched ON.
– Lights up orange when the server is switched OFF, but mains
voltage is present (standby mode).
I
– Flashes light-green / orange: iRMC booting
I
– Lights up light-green: power-on delay
I
BX2560 M1
After connecting the server to the mains, it will take about
60 seconds until the server will switch into standby mode.
After linking the server to the mains voltage (system unit
is switched on / after mains failure) the iRMC will boot.
The system cannot be switched on, until the iRMC boot
sequence is complete. During this time, the power-on
indicator will flash light-green / orange.
After shutting down, the server cannot be switched on
again right away. If the On/Off button is pressed right
after shutting down the server, the power-on indicator will
light up light-green until the delay period ends and the
server will boot.
If line voltage is insufficient, the server cannot be
switched on. If the On/Off button is pressed in this state,
the power-on indicator will light up light-green.
Operating Manual
Starting up and operation
51