Fujitsu Primergy BX2560 M1 Operating Manual page 17

I
If a server blade is configured with one or two mezzanine cards, this does
not exclude other configurations for any of the other server blades in a
system unit.
If you want to install mezzanine cards in server blades, the system unit
must be fitted with the corresponding Fibre Channel, SAS, Infiniband
and/or Ethernet connection blades. You can find detailed information
about the equipping rules for connection blades in the operating manual
for the system unit.
Mezzanine cards may only be installed and removed by authorized,
qualified personnel. The procedure is described in the FUJITSU Server
PRIMERGY BX2560 M1 Server Blade Upgrade and Maintenance
Manual.
USB flash module (UFM)
A UFM (USB flash module) can also be configured.
SATA DOM
DOM stands for "disk on module". It is an extremely space and energy saving
flash memory that is particularly used as a boot drive in servers. The memory
technology is equivalent to that of SSDs. The PRIMERGY BX2560 M1 offers a
DOM with a SATA 3G interface, which can be inserted directly into the SATA
port of the system board.
Graphics controller
The server blade has an onboard graphics controller (integrated in the iRMC
controller). A monitor can be connected via the Y-cable on the front of the server
blade.
I
For peripherals like keyboard, mouse, display, optical drive, etc.
Advanced Video Redirection and Virtual Media connection by iRMC is
recommended.
External ports
The server blade has the following ports on the front:
– One USB 3.0 port
– One port for a special Y-cable, with 2 USB 2.0 ports and one VGA port.
BX2560 M1
Operating Manual
Functional overview
17