Side Panel - Vertex Standard VXA-710 Spirit Operating Manual

PTT ( Push To Talk ) Switch
Press this button to transmit when you are operating
in the COM band (118.000 - 136.975 MHz). Release
this button to return to the "Receive" mode. See page
15.
MONITOR Switch
This button may be pressed to "Open" the squelch
manually, allowing you to listen for very weak sig-
nals. Press and hold this button for 2 seconds to "Open"
the squelch continuously. Press this button again to
resume normal (quiet) monitoring. See page 17.
EXT DC Jack
When an external 12-Volt DC power source is avail-
able, you may connect the (optional) E-DC-5B DC
Cable w/Noise Filter or E-DC-6 DC Cable here.
Do not connect any wire to this jack if that
wire is connected directly to a 28-Volt DC
source. Connecting the VXA-710 directly to a source
which exceeds 15.0 Volts DC will result in damage
to the unit.
VXA-710 S O
PIRIT PERATING
C & C
ONTROLS ONNECTORS
M
ANUAL
( S )
P
IDE ANEL
5