Changing The Channel Step - Vertex Standard VXA-710 Spirit Operating Manual

Changing the Channel Steps
The VXA-710 allows you to choose channel steps in the
FM broadcast band: 5/10/12.5/15/20/25/50/100 kHz per
step. The VXA-710 is set up at the factory to 100 kHz
which probably is satisfactory for most operation. How-
ever, if you need to change the channel step increments,
the procedure to do so is very easy.
Press and hold in the
stantly recalls Menu Item (Step).
Press the key again to enable adjustment of this
Menu Item.
Rotate the DIAL selector knob select the new channel
step size.
When you have made your selection, press the
key to save the new setting, then press the PTT key
repetitively until the radio exit to normal operation.
Note: The VXA-710 does not allow you to change the
channel steps in the Air band. On the Air band, the steps
are fixed at 25 kHz/step.
VXA-710 S O
PIRIT PERATING
M
ISCELLANEOUS
key for 2 seconds. This in-
M
ANUAL
S
ETTINGS
43