Product Description; Components On The Logano Plus Gb312 Boiler; Bc10 Controls - Buderus Logano plus GB312 Operating Instructions Manual

Product description

2 Product description
2.1

Components on the Logano plus GB312 boiler

The boiler is a gas-fired condensing boiler with an
aluminium heat exchanger.
The boiler comprises:
– Control panel
– Frame and casing
– Boiler block with insulation
– Gas burner
The control panel monitors and controls all electrical
boiler components.
The boiler block transfers the heat generated by the
burner to the heating water. The insulation prevents
energy losses.
This product meets all the essential
requirements of the relevant
standards and directives.
2.2

BC10 controls

USER NOTE
Further information about the controls
can be found in the
controller documentation.
1
Fig. 2 Controls on the BC10 base controller
Item 1: ON/OFF switch
Item 2: Dial for setting DHW temperature
Item 3: "DHW heating" LED
Item 4: Status display
Item 5: Dial for maximum boiler temperature when in heating
mode
Item 6: "DHW demand" LED
We reserve the right to make any changes due to technical modifications.
Operating instructions Logano plus GB312 gas-fired condensing boiler • Issue 06/2005
BC10 base
2 3 4
9 8
12 11 10
1
8
7
6
5
4
Fig. 1 Logano plus GB312 boiler
1 Control panel
2 Gas burner
3 Boiler front panel
4 Siphon
5 Boiler block with insulation
6 Burner control unit
7 Gas train
8 Boiler casing
5 6
Item 7: Base plate with slot for a programming unit,
e.g. RC30 (behind fascia)
Item 8: "Burner" (ON/OFF) LED
Item 9: Diagnostic plug
Item 10: "Status display" button
Item 11: "Chimney sweep" button for flue gas test and
manual mode
Item 12: "Reset" button
2
7
2
3
5