Table of Contents
Advertisement
ASSEMBLY
Moving the air compressor
Before moving the compressor, switch off and disconnect it from the mains
power supply.
• Always use the handle.
• Do not lift by (or put strain on) fittings, valves or hoses.
• Take care when moving the compressor to avoid damaging the valves or
fittings.
The compressor is heavy, get assistance when lifting and moving this compressor
to avoid personal injury.
PREPARING FOR USE
Before connecting your compressor to the mains supply,
Check the Oil
1.
Make sure that the oil level is within the small
circle on the oil level indicator. See figure 2.
• If needed top up the reservoir with Clarke
SAE 30 compressor oil, available from your
Clarke dealer.
Figure 2
11
OIL Level
Indicator
Advertisement
Table of Contents
