Disassembly Procedure - Yamaha 01v 96 Service Manual

DISASSEMBLY PROCEDURE

Note: Take care not to trap your fingers.
After replacing the circuit board or fader of FD, please
calibrate the faders. (See page 119.)
1. Control Panel Assembly
(Time required: About 3 minutes)
1-1. Remove the twenty (20) screws marked [50]. (Fig.1)
1-2. Lift the control panel assembly from the rear side
and fasten them by the stay. (Photo.1)
When assembling the control panel assembly
with the bottom assembly, put the screws of
the front side → right side panel side → left
side panel side → rear side in order.
<Left side view>
[50]
Side panel L
[50]: Bind Head Tapping Screw-B
<Front view>
[50]
<Top view>
<Rear view>
[50]
Fig .1
<Right side view>
[50]
Side panel R
Control panel assembly
Bottom assembly
4.0X8 MFZN2BL (EG340190)
01V96
23