Advertisement
4 Install heat shrink tubing on the battery cable jacket.
Terminal ring
5 Insert and secure the fuse in the fuse holder assembly.
6 Assemble the negative wire:
7 Assemble the positive wire:
8 Install heat shrink tubing on the braided ground wire.
8
Universal Vehicle Power Supply Installation Instructions
Ground wire
Heat shrink
tubing
Fuse
Strip 0.60 cm (0.25 in) of insulation from the green
a
and white wires.
b Twist the wires together.
c
Crimp a 3/8-inch terminal ring onto the wires.
Cut a strip of red wire that is 5.08 cm (2 in) long.
a
b Strip 0.60 cm (0.25 in) of insulation from the red and
black wires.
c
Twist the wires together.
d Crimp the fuse block assembly to the wires.
Crimp the red wire you cut to the other end of the fuse
e
block assembly.
Black wire
Red wire
Battery cable
jacket
Heat shrink
tubing
Green wire
White wire
Advertisement
