Advertisement
3 Slide the positive fuse link terminal ring from the input
4 Place another 3/8-inch washer onto the battery clamp.
5 Thread another 3/8-inch nut onto the battery clamp bolt
6 Repeat Steps 1 through 5 for the negative wire.
7 Connect the ground wire. For help, see
Connect to the Side Battery Terminal
When you remove the battery terminal side post bolts from
the vehicle battery, the vehicle computer and radio return to
their default settings.
1 Remove positive battery terminal side post bolt from the
Ground
wire (black)
2 Fasten a 3/8-inch nut to the 3/8 x 1-1/2-inch positive
3 Place a 3/8-inch washer on the battery terminal post.
4 Slide the positive wire fuse link terminal ring from the
10
Universal Vehicle Power Supply Installation Instructions
power cable onto positive battery clamp bolt.
and tighten the nut securely.
Ground Wire" on page
vehicle battery.
Negative wire
(green and white)
Positive battery
terminal post
battery terminal post.
power input cable onto the positive battery post.
11.
Washers
Nut
"Fasten the
Advertisement
