Advertisement
WARRANTY REIMBURSEMENT & CLAIM INFORMATION:
Submit a warranty claim for each recall campaign service immediately upon completion of
the repair. This campaign requires you to file a warranty claim using the following information.
Short Form Claim:
Use the Short Form Claim for new, and customer owned units that require ignition switch lead
wire inspection and/or re-routing. Labor time is 0.3 hours.
GENERAL
CLAIM NUMBER:
ENTRY TYPE:
(Dealer Chooses)
MODEL:
FRAME:
REPAIR DATE:
MILEAGE:
CAMPAIGN NUMBER:
Long Form Claim:
Use the Long Form Claim for customer owned units requiring ignition switch assembly
replacement or for units with additional time or parts required as approved by Tech-Line. Labor
time is 1.3 hours.
IGNITION SWITCH LEAD WIRE INSPECTION AND REPLACEMENT
GENERAL
CLAIM NUMBER:
ENTRY TYPE:
(Dealer Chooses)
MODEL:
FRAME:
REPAIR DATE:
MILEAGE:
CAMPAIGN NUMBER:
LABOR HOURS:
PARTS
REPLACEMENT PART NUMBER: 99103-11237
FAILURE DESCRIPTION
DESCRIPTION OF FAILURE:
SUBLET
SUBLET AMOUNT:
SUBLET REFERENCE NUMBER:
SUBLET REPAIR DESCRIPTION:
Suzuki Connect Long Form warranty claim entries with additional parts or labor require a prior
authorization (PAS) code from TECH-LINE or your Technical Service Manager, or the Suzuki
Connect system will not accept the claim.
RECALL CAMPAIGN
IGNITION SWITCH LEAD WIRE INSPECTION, REROUTE
Short Form Instructions
RECALL CAMPAIGN
Long Form Instructions
NOTE: Do not use the "$" when entering an amount
XXXXX,X (Dealer enters number)
Model, Frame or Control Sequence
GSX1300RK8
X821XXXXX
Enter date of repair
Enter mileage on unit
2A05
XXXXX,X (Dealer enters number)
Model, Frame or Control Sequence
GSX1300RK8
X821XXXXX
Enter date of repair
Enter mileage on unit
2A05
1.3 hrs
Replace Ignition Switch Assembly per
Service Bulletin GS-GSX-GSXR-GSF 183
as approved by TECH-LINE
2A05
- 9/12-
QTY: 1
Advertisement
